Assembly halls come in many sizes, ceiling heights and with different production flows, ambient temperatures and varying degrees of automation. Lighting solutions for production halls need to be flexible to suit the needs of both automated work processes and detailed inspection work performed by people. Introducing lighting zones that are adaptable to different illuminance levels increases flexibility, as work processes may change rapidly.
Production hall employees have differing lighting needs. The solution can include dimmable task area lighting or additional luminaires where needed. Lighting requirements vary from the medium low illuminance levels in assembly halls and welding and forging areas to the higher levels required in precision machining and monitoring stations. Workstation lighting should be positioned above and slightly to the side of each workstation.
Linear or symmetrical LED industrial lighting products are the favoured option for production and assembly halls. Flexible systems that are easily adaptable to changes in work operations are the clear choice. A high IP rating is essential for use in dusty production hall environments. High-bay LED luminaires are suitable for areas with ceiling heights above 6 m.
Lighting requirements in EN 12464‐1
Industrial activities and crafts – Metal working and processing
| Type of task / activity area |
Lux-level (Em) |
Glare rating (UGRL) |
Uniformity (U0) |
Colour rendition (Ra) |
Em,z | Em,wall | Em,ceiling | Specific requirements |
|
| required | modified | U0 ≥ 0,10 | |||||||
| Open die forging | 200 | 300 | 25 | 0,60 | 80 | 50 | 50 | 30 | |
| Drop forging | 300 | 500 | 25 | 0,60 | 80 | 75 | 75 | 30 | |
| Welding | 300 | 500 | 25 | 0,60 | 80 | 75 | 75 | 30 | |
| Rough and average machining: tolerances > 0,1 mm | 300 | 500 | 22 | 0,60 | 80 | 75 | 75 | 30 | |
| Precision machining: grinding: tolerances < 0,1 mm | 500 | 750 | 19 | 0,70 | 80 | 150 | 150 | 75 | |
| Scribing: inspection | 750 | 1000 | 19 | 0,70 | 80 | 150 | 150 | 100 | |
| Wire and pipe drawing shops: cold forming | 300 | 500 | 25 | 0,60 | 80 | 75 | 75 | 30 | |
| Plate machining: thickness > 5 mm | 200 | 300 | 25 | 0,60 | 80 | 50 | 50 | 30 | |
| Sheet metalwork: thickness < 5 mm | 300 | 500 | 22 | 0,60 | 80 | 75 | 75 | 30 | |
| Tool making: cutting equipment manufacture | 750 | 1000 | 19 | 0,70 | 80 | 150 | 150 | 75 | |
| Assembly: - rough - medium - fine - precision |
200 300 500 750 |
300 500 750 1000 |
25 25 22 19 |
0,60 0,60 0,60 0,70 |
60 80 80 80 |
50 75 150 150 |
50 75 150 150 |
30 30 75 100 |
|
| Galvanizing | 300 | 500 | 25 | 0,60 | 80 | 75 | 75 | 30 | |
| Surface preparation and painting | 750 | 1000 | 25 | 0,70 | 80 | 150 | 150 | 100 | |
| Tool, template and jig making, precision mechanics, micro-mechanics | 1000 | 1500 | 19 | 0,70 | 80 | 150 | 150 | 100 | |
Industrial activities and crafts – Electrical and electronic industry
| Type of task / activity area |
Lux-level (Em) |
Glare rating (UGRL) |
Uniformity (U0) |
Colour rendition (Ra) |
Em,z | Em,wall | Em,ceiling | Specific requirements |
|
| required | modified | U0 ≥ 0,10 | |||||||
| Cable and wire manufacture | 300 | 500 | 25 | 0,60 | 80 | 100 | 100 | 50 | |
| Winding: - large coils - medium-sized coils - small coils |
300 500 750 |
500 750 1000 |
25 22 19 |
0,60 0,60 0,70 |
80 80 80 |
100 150 150 |
100 150 150 |
50 75 100 |
|
| Coil impregnating | 300 | 500 | 25 | 0,60 | 80 | 100 | 100 | 50 | |
| Galvanizing | 300 | 500 | 25 | 0,60 | 80 | 100 | 100 | 50 | |
| Assembly work: - rough. e.g. large transformers - medium. e.g. switchboards - fine. e.g. telephones, radios, IT equipment (computers) - precision. e.g. measuring equipment, printed circuit boards |
300 500 750 1000 |
500 750 1000 1500 |
25 22 19 16 |
0,60 0,60 0,70 0,70 |
80 80 80 80 |
100 150 150 150 |
100 150 150 150 |
50 100 100 100 |
|
| Electronic workshops, testing, adjusting | 1500 | 2000 | 16 | 0,70 | 80 | 150 | 150 | 100 | |
Industrial activities and craft – Vehicle construction and repair
| Type of task / activity area |
Lux-level (Em) |
Glare rating (UGRL) |
Uniformity (U0) |
Colour rendition (Ra) |
Em,z | Em,wall | Em,ceiling | Specific requirements |
|
| required | modified | U0 ≥ 0,10 | |||||||
| Press shop - large parts | 300 | 500 | 25 | 0,60 | 80 | 100 | 50 | 30 | |
| Press shop - visual inspection | 500 | 750 | 22 | 0,60 | 80 | 150 | 50 | 30 | |
| Body work and assembly - automatic line | 300 | 500 | 25 | 0,60 | 80 | 100 | 50 | 30 | |
| Body work and assembly - manual welding | 500 | 750 | 22 | 0,60 | 80 | 150 | 50 | 30 | |
| Painting, spraying chamber, polishing chamber | 750 | 1000 | 22 | 0,70 | 80 | 150 | 150 | 30 | |
| Painting, inspection, touchup and polishing | 1000 | 1500 | 19 | 0,70 | 90 | 150 | 150 | 30 | 4000 K ≤ CCT ≤ 6500 K |
| Upholstery manufacture (manual) | 1000 | 1500 | 19 | 0,70 | 80 | 150 | 50 | 30 | |
| Detailing: - Subparts assembly (doors, dashboard, upholstery) - Underchassis assembly - Motor and mechanical assembly - Final assembly conveyor line |
750 | 1000 | 22 | 0,70 | 80 | 150 | 50 | 30 | |
| Detailing: - Work with electronics |
750 | 1000 | 22 | 0,60 | 90 | 150 | 50 | 30 | 4000 K ≤ CCT ≤ 6500 K for recognition of colours |
| Final inspection | 1000 | 1500 | 19 | 0,70 | 90 | 150 | 150 | 30 | |
| General vehicle services, repair and testing | 500 | 750 | 22 | 0,60 | 80 | 100 | 50 | 30 | Consider local lighting. |
Industrial activities and crafts – Wood working and processing
| Type of task / activity area |
Lux-level (Em) |
Glare rating (UGRL) |
Uniformity (U0) |
Colour rendition (Ra) |
Em,z | Em,wall | Em,ceiling | Specific requirements |
|
| required | modified | U0 ≥ 0,10 | |||||||
| Automatic processing e.g. drying, plywood manufacturing | 50 | - | 28 | 0,40 | 40 | - | - | - | |
| Steam pits | 150 | 200 | 28 | 0,40 | 40 | 50 | 50 | 30 | |
| Saw frame | 300 | 500 | 25 | 0,60 | 60 | 100 | 100 | 50 | Prevent stroboscopic effects. |
| Work at joiner's bench, gluing, assembly | 300 | 500 | 25 | 0,60 | 80 | 100 | 100 | 50 | |
| Polishing, painting, fancy joinery | 750 | 1000 | 22 | 0,70 | 80 | 150 | 150 | 100 | |
| Work on wood working machines. e.g. turning, fluting, dressing, rebating, grooving, cutting, sawing, sinking | 500 | 750 | 19 | 0,60 | 80 | 150 | 150 | 75 | Prevent stroboscopic effects. |
| Selection of veneer woods | 750 | 1000 | 22 | 0,70 | 90 | 150 | 150 | 100 | 4000 K ≤ CCT ≤ 6500 K |
| Marquetry, inlay work | 750 | 1000 | 22 | 0,70 | 90 | 150 | 150 | 100 | 4000 K ≤ CCT ≤ 6500 K |
| Quality control, inspection | 1000 | 1500 | 19 | 0,70 | 90 | 150 | 150 | 100 | 4000 K ≤ CCT ≤ 6500 K |
Traffic zones inside buildings
| Type of task / activity area |
Lux-level (Em) |
Glare rating (UGRL) |
Uniformity (U0) |
Colour rendition (Ra) |
Em,z | Em,wall | Em,ceiling | Specific requirements |
|
| required | modified | U0 ≥ 0,10 | |||||||
| Circulation areas and corridors | 100 | 150 | 28 | 0,40 | 40 | 50 | 50 | 30 | - Illuminance at floor level. - Ra and UGR similar to adjacent areas. - 150 lx if there are vehicles on route. The lighting of exits and entrances shall provide a transition zone to avoid sudden changes in illuminance between inside and outside by day or night. - Care should be taken to avoid glare to drivers and pedestrians. |
| Stairs, escalators, travolators | 100 | 150 | 25 | 0,40 | 40 | 50 | 50 | 30 | Illuminance at floor level. Requires enhanced contrast on leading edge of the steps. |
| Elevators, lifts | 100 | 150 | 25 | 0,40 | 40 | 50 | 50 | 30 | Light level in front of the lift should be at least Em = 200 lx. |
| Loading ramps/bays | 150 | 200 | 25 | 0,40 | 40 | 50 | 50 | - | |
